
Friday, April 19, 2019

PCB's (PolyChlorinated Biphenyls) are another, obsolete building material that can create both health and financial risks. Like lead based paint this construction component was also banned in the USA in 1978.
Asbestos was banned 4 years earlier in 1974.
Due to the fact that PCB’s don’t easily degrade or break down made them a popular ingredient and was predominately used in numerous construction materials for industrial use.
Even though the USA banned the materials decades ago, it is still widely used worldwide and continues to expose many to its harmful environmental effects.
Like other outdated hazardous building materials such as asbestos and lead-based paint, PCB’s are still in place and unfortunately there is no way to practically remove them all.
If not properly controlled they will subject many to far reaching and damaging health effects along with financial liabilities.
This is especially concerning in schools, hospitals and other public buildings where the risk of health and financial exposer is greater than in other typical buildings.
The more people are educated about the concerns of exposure the greater the chance of avoiding and mitigating that exposure.
The first thing to know is that PCB’s come in both solid and liquid forms and need to be dealt with differently.
For this discussion, we are looking at the solid form of PCB’s and how there is a simple and safe way to control them to avoid exposure.
I’ve personally been on projects where the coatings on a building contained all three solid hazardous materials, PCB’s, Asbestos and Lead-Based Paint.
The release of these toxic materials become more likely over time with those materials breaking down after attack from weather, UV (ultra violet) rays, building movement due to vibration, expansion and contraction along with other environmental factors such as acid rain, chemical air pollution, etc.
The first step is to identify the offending material and then contain it. This can be accomplished by covering and sealing it in place with a simple and hopefully green coating.
Although any coating will seal it in, only a sustainable, industrial coating with specific characteristics that is designed and tested for that use should be implemented.

Only a proven, quality coating should be used to in-place manage hazardous materials, guaranteeing that those materials are properly controlled and can help prevent potential harmful exposure.
When using coatings to deal with the containment and in place management of hazardous materials only superior coatings that have been tested and demonstrated to hold up in extreme, exterior situations should be considered.
Also a coating that is designed to last long term – at least 20 years.
What are your questions?
We are always here to help and excited to answer them.
Contact us at +1 (800) 266-3982 , or send us an email at service@encasement.com and leave a comment below.

Friday, November 16, 2018
November is Lung Cancer Awareness Month including asbestos education, so this is a good time to raise awareness about preventing unnecessary exposure to asbestos that can cause lung cancer as well as contribute to other possible health concerns.

Wednesday, October 10, 2018
Short of moving your building or raising it up above flooding, the best approach to take to reduce storm, flooding and natural disaster losses is to simply use a proven coating to wind and waterproofthe surfaces in the path of destruction.

Tuesday, September 18, 2018
We recently passed the anniversary of 9-11-2001 tragedy of the attack on the Twin Towers in New York. I wanted to remind everyone that the effects of that fateful day are still being felt and especially by some of the heroes that were affected by the initial exposure and then the secondary exposure that took place during the cleanup. Some of those exposed were firefighters, police officers, EMTs (Emergency Medical Technician), construction workers, transit workers, cleanup workers, debris removal crews, truck drivers, nearby office workers, and Lower Manhattan residents.

Tuesday, August 21, 2018
I discussed in a recent blog the importance of keeping the aesthetics of a historic building intact. Making sure that the look and overall presentation on a structure is preserved is very significant. This is especially true with landmark properties that have prominent and distinct features. Preservation can become very difficult when it entails obsolete building materials that contain hazardous materials that are typically removed and replaced. Three of the most common of hazardous materials is lead-based paint, asbestos and PCBs. In the USA, lead was used in paints up until 1978. It then was banned for its negative health effects, especially with children in their developing stages. PCBs, or polychlorinated biphenyls, were banned from paints, caulking and surface coatings in 1979 and asbestos was banned in 1974. All these bans were due to the negative health and environmental effects of these products.

Tuesday, July 17, 2018
Lead Paint Poisoning is Preventable Through Education and Action
