
Tuesday, April 03, 2018

A sustainable building is one that is resistant to increasingly stronger storms, wind, sand, hail along with attacks from chemicals, UV rays and all types of substances that abuse, impact and prematurely age surfaces.
To keep those same buildings standing and in service over long periods of time, the outside surfaces need to be defensively protected with coatings that are storm, age and overall weather-resistant.
A building maintained and kept in service is all around less expensive on the planet and on the pocketbook.
Removal and replacement, and building demolition generate large amounts of unwanted and expensive waste that needs to be transported and stored.
The breakdown of that same wastereleases massive amounts of CO2 emissions/green house gases that contribute to global warming/climate change.
In addition to that, large amounts of precious natural resources become necessary to substitute demolished buildings with new ones and extensive energy is required to manufacture and produce the building materials.
As we are faced with even more limited natural resources, there is a necessity to conserve along with saving time and lessening energy use.
Even abandoned buildings and those facing environmental challenges, such as containing asbestos, lead-based paint, PCBs and roof leaks, can be turned green with far less cost than demolition and replacement.
Saving on time, money and natural resources than a total building swap.
How do we turn them green? What can be a better way than to use solar reflecting coatings that save on time and money by sealing in building components including hazardous ones?
This can help stop energy loss through leaks and the unnecessary absorption of excessive heat from the sun, especially on roofing.
I firmly believe that all buildings need to be sustainable and resistant to the increasing onslaught of wicked weather.
There is a demand for buildings to be preserved and reinforced by simply applying protective, defensive coatings that make susceptible properties storm resistant and sustainable.
These same coatings are also used to enhance the looks/ascetics of buildings while providing exceptional protection.
Based on experience, it is far less expensive to protect, repair and restore a building then to fully replace it. That’s why buildings that are protected and older ones are restored are the greenest ones.
What are your questions?
We are always here to help and excited to answer them.
Contact us at +1 (800) 266-3982 , or send us an email at service@encasement.com and leave a comment below.

Friday, November 16, 2018
November is Lung Cancer Awareness Month including asbestos education, so this is a good time to raise awareness about preventing unnecessary exposure to asbestos that can cause lung cancer as well as contribute to other possible health concerns.

Wednesday, October 10, 2018
Short of moving your building or raising it up above flooding, the best approach to take to reduce storm, flooding and natural disaster losses is to simply use a proven coating to wind and waterproofthe surfaces in the path of destruction.

Tuesday, September 18, 2018
We recently passed the anniversary of 9-11-2001 tragedy of the attack on the Twin Towers in New York. I wanted to remind everyone that the effects of that fateful day are still being felt and especially by some of the heroes that were affected by the initial exposure and then the secondary exposure that took place during the cleanup. Some of those exposed were firefighters, police officers, EMTs (Emergency Medical Technician), construction workers, transit workers, cleanup workers, debris removal crews, truck drivers, nearby office workers, and Lower Manhattan residents.

Tuesday, August 21, 2018
I discussed in a recent blog the importance of keeping the aesthetics of a historic building intact. Making sure that the look and overall presentation on a structure is preserved is very significant. This is especially true with landmark properties that have prominent and distinct features. Preservation can become very difficult when it entails obsolete building materials that contain hazardous materials that are typically removed and replaced. Three of the most common of hazardous materials is lead-based paint, asbestos and PCBs. In the USA, lead was used in paints up until 1978. It then was banned for its negative health effects, especially with children in their developing stages. PCBs, or polychlorinated biphenyls, were banned from paints, caulking and surface coatings in 1979 and asbestos was banned in 1974. All these bans were due to the negative health and environmental effects of these products.

Tuesday, July 17, 2018
Lead Paint Poisoning is Preventable Through Education and Action
